Προβάλλονται και τα 10 αποτελέσματα
SunSDR2 PRO transceiver – is an up-to-date system of the amateur radio communication in the HF and VHF frequency bands with the digital signal processing. This device is considered to work with the PC via Ethernet (LAN) without installing the drivers or via WLAN. Receiver is based on the direct conversion principle, transmitter- on the direct synthesis.
ELAD FDM-DUO is a SDR tranceiver that offers the possibility to operate ST and-alone like traditional radio or attached to a Personal Computer discovering the possibilites offered by the SDR technologies.
Expert Electronics ColibriDDC small-size receiver is intended to receive the signals in HF bands 0.09 to 55 Mhz. Also with the help of external filters it allows to receive frequencies to 800 MHz and work together with PC. It was designed in accordance with the principle of direct digital signal sampling by high speed analog-digital converter. Such architecture allows to get rid off additional noise of analog cascades and makes the air sound natural and transparent.
The ANAN-10EE is the entry level model to the world of SDR transceivers by Apache Labs. The transceiver supports the entire shortwave from 160 to 10m plus 6m band and comes in a compact size casing. It supports all modes like SSB, AM, FM, CW, digital mdoes and much more (defined by the software). Internally a 14-bit AD converter and a somewhat smaller FPGA is used to process the digitised data. This limits the use to max. 2 simultaneous receivers with a max. spectrum width of 384kHz each. Still the receivers have exceptional good results for blocking dynamic range and large signal handling capabilities. Like with all other ANAN transceiver the interface to the computer is Gigabit Ethernet.
The ANAN-10E is a shortwave transceiver (160 to 10m) incl. 6m band, and comes in a compact casing. It uses a fast 16 bit AD converter chip, which offers a high resolution and an excellent dynamic range. The max. transmit power is 10W. The transceiver supports all modes like SSB, AM, FM, CW, digital modes and much more. The receive range spans from 10 kHz to 55MHz, the entire spectrum can be displayed in realtime. Up to 4 parallel receivers can be used simultaneously.
The ANAN-100 is a shortwave transceiver from 160 to 10m ,plus 6m band. The case is larger as with the ANAN-10E to provide space for the larger amplifier with 100W transmit power. For 6m reception an additional LNA is provided. The AD converter and the FPGA are the same as with the smaller model ANAN-10E – a 16 bist LTC 2208 and an Altera 3C40. Due to the larger case another TCXO with a better frequency stability can be used (±0.1ppm instead of ±2.5ppm).
The Apache Lab ANAN-100D offer the entire shortwave range from 160 to 10m, plus the 6m VHF band. The maximum transmit power is 100W, adjustable from 1W minimum. Of course all modes are supported (depending on software). It is equipped with two of the fast, 16 bit wide analog/digital converters LTC 2208.
ELAD FDM-S1 is an HF DIrect Conversion receiver working with ADC at 61.44 MHz sampling frequency and an FPGA to convert to a stream I/Q data to 192,384,768,1536 and 3072 kHz I/Q channels @ 32 bit/sample and 6144 kHz I/Q channels @16 bit/sample throught USB 2.0 connections.
ELAD FDM-S2 has a direct sampling receiver based on 122.88MHz 16bit single channel ADC converter covering HF 6m and offering the possbility to exploiting the undersamplig mode covering FM Broadcasting Band and exploring part of VHF Band (135-160)MHz.
Προβάλλονται και τα 10 αποτελέσματα